seaoreo.blogg.se - Burnout drift 3 advanced method

BURNOUT DRIFT 3 ADVANCED METHOD DRIVERS
BURNOUT DRIFT 3 ADVANCED METHOD DRIVER

These signs are meant to indicate you’re approaching a braking zone, and the suggested distance to begin and end your braking. These typically start with a number such as “4” and go down to “1” as you approach your turn-in point.

Brake Markers: Brake Markers are numbered signs located at various turns on a race track.

This just means, that you must be prepared and knowledgeable of what’s on the other side of that turn, so as to avoid contact with a structure, another driver, or going off track.

Blind Turn: Many tracks with features such as elevation changes, often have sections of the track that are not visible (blind) as you approach them.

It’s important to make sure mirrors are in the correct position so you can minimize the space on either side of the car which is “blind” from the driver. In many cases, these are located on both sides of the vehicle.

Blind spot: Every vehicle has its blind spots.

It’s equally important for cars who are re-entering the track, to stay within bounds of the blend line to avoid a collision with faster moving vehicles. It is imperative that all cars on track maintain their distance from the blend line, to avoid collision with slower moving vehicles.

This lane is utilized by cars who are re-entering the track, from the pit area. Blend Line: The blend line divides the pit lane exit from the cars on the track.This means that car has been excluded from the race.

BURNOUT DRIFT 3 ADVANCED METHOD DRIVER

Black Flag: A black flag is usually seen in conjunction with a racer’s number, notifying that the driver must return to the pits.Bend: A slight adjustment in the direction of the track.Maintaining a balance during cornering is necessary, in order to keep your grip on the pavement. This is based on cars’ weight and center of gravity, and forces applied to the car such as braking, turning, etc. Balance: Every vehicle on the road has its own balance.

These off-road barriers are used to aid in the protection of exterior/foreign objects or hazardous sections of road/track that might be susceptible to low impact. Armco: Armco refers to a specific type of barrier used on roads and race tracks alike.When “attacking” a corner, the driver’s goal is to “clip” the apex, by successfully directing the car to and through the midpoint or apex of the turn. Apex: In motorsports, this term refers to the “midpoint” or neutral section of a turn.Vehicles can be front wheel drive (FWD), rear wheel drive (RWD), all wheel drive (AWD), or four wheel drive (4WD). All Wheel Drive: This refers to the axle of the car which “drives” or propels the vehicle forwards or backward.Active Aerodynamics: Active aerodynamics are added to vehicles, giving them the ability to make adjustments based on real-time situations, like high speeds, in order to keep air moving past (over, through, around) the car, allowing it to stay planted to the ground.Aerodynamic: The shape of a car and its body that allow drag to be reduced as air passes over and around it.By placing your hands here, you can safely navigate a track without having to remove your hands from this position.

BURNOUT DRIFT 3 ADVANCED METHOD DRIVERS

This allows drivers to securely hold the wheel, due to its ergonomic shape, all while allowing them to freely rotate the steering wheel from one direction to the other. In this case, the 9 and 3 o’clock position.

9 and 3: This refers to your hands on the wheel and the hands of a clock.